Panasonic KX-TD500 - Manual (Page 311)

DDI / DID
Programming Guide 311
Entry No.99 : 123456 (98)
Entry No.100 : 123456 (99)
Notes
• If more than 15 digits are entered in "[Base Number] Dial" field, the following warning
message will be displayed:
"W9005 : Base dial number must not exceed 15 digits. Truncate it?"
If you press "OK," the exceeded digits will be truncated automatically.
• If the total digits of "Base Number" and "Number of Digits" are over 16, the following
error message will be displayed:
"E9010: Number of DDI dial must be equal to or less than 16 digits."
Then the operation will be aborted.
• If "Beginning Entry No." exceeds 991, the following error message will be displayed:
"E9011: Beginning Entry No. must be equal to or less than 991."
Then the operation will be aborted.
• The new entries will override the old ones, if "DDI / DID / MSN" numbers are already
registered in the specified areas.
• If the number of remaining Entry fields is less than the number specified by "Number of
Registrations" setting, for example, "Number of Registrations" is 20 and "Beginning
Entry No." is 991 (10 of 1000 Entry fields are left), only the first 10 DDI / DID / MSN
numbers are registered.
Parameter [Base Number] Dial
Default Blank
Value Range Up to 15 digits consisting of 0-9
Description/Function Specifies the base number for automatic registration.
Additional numbers are appended to the end of this number.
Reference None
Parameter [Additional Number] Number of Registrations
Default 10 entries
Value Range 10-100 entries in 10 entries increments
Description/Function Specifies the number of DDI / DID / MSN entries to be registered
automatically.
Reference None