Panasonic KX-TD500 - Manual (Page 127)

Group
Programming Guide 127
Parameter Line Hunting Order
Default Normal
Value Range 1. Normal
2. Reverse
3. Sequential
Description/Function Specifies the hunting sequence of idle lines on a trunk group basis.
1. Normal
The system connects the user to an idle trunk line with the
lowest physical number.
2. Reverse
The system connects the user to an idle trunk line with the
highest physical number.
3. Sequential
To avoid repeated use of the same trunk line, rotation is
performed in numerical order (from the lowest to the highest
trunk port physical number.) Busy lines are skipped, of course.
Reference • 2.8 System Option (P/G)
– Trunk hunting mode
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant (1-8) to which the trunk group is assigned.
(This setting is required when "Tenant Service" is employed.)
Reference • 1.3 System Features (F/G)
– Tenant Service
• 2.2 Tenant (P/G)