Panasonic KX-TD500 - Manual (Page 64)

System
64 Programming Guide
Parameter 77-92 Other PBX 01 - Other PBX 16
Default Blank
Value Range 1-2 digits consisting of 0-9
Description/Function Specifies the leading 1 or 2 digits of the other PBX extension
numbers.
If you employ PBX code method for TIE calls, this programming
is not required.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
• 9.2 Number Transformation (P/G)
Parameter 93 Paging Deny Set / Cancel
Default 721
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for setting / cancelling Paging Deny
feature.
Reference • 2.7.4 Denying the Paged Announcement (Paging—Deny) (U/M)
Parameter 94 Trunk Busy-out
Default 726
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for Trunk Busy-out feature. [For
Manager, Operator only]
Reference • 3.2.3 Trunk Busy-out Setting (U/M)
Parameter 95 Walking Station
Default 727
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for Walking Station feature.
Reference • 2.9.1 Using the Same Extension Number and the Setting of Your
Previous Extension (Walking Station) (U/M)