Panasonic KX-TD500 - Manual (Page 296)

ARS (Automatic Route Selection)
296 Programming Guide
7.4 Routing Plan
Used to specify the Trunk Group number (1-48) and Modified Digit Table number (1-48) to be
used for each route plan and time schedule. Up to 48 Routing Plan entries can be programmed
in the system.
Parameter Plan No.
Default 1
Value Range 1-48
Description/Function Specifies the Routing Plan Table (1-48) which you are going to
programme.
Reference • 1.6 Originating Features(F/G)
– Automatic Route Selection (ARS)
Parameter [Time-A, -B, -C, -D] Trunk Group No.
Default None
Value Range None, 1-48
Description/Function Specifies the TRG (Trunk Group) (1-48) which is used for routing
the call. Up to 16 trunk groups can be entered.
Reference • 1.6 Originating Features(F/G)
– Automatic Route Selection (ARS)