Panasonic KX-TD500 - Manual (Page 159)

Group
Programming Guide 159
Parameter [UCD Setting] Supervisor Extension
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the Supervisor Extension per UCD Group.
The extension specified as the Supervisor Extension can monitor
the number of waiting calls (calls placed in the waiting queue) and
the Login/Logout status of UCD Group members through the
corresponding DSS buttons.
Reference • 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Parameter [UCD Setting] UCD Call Waiting
Default Enable
Value Range 1. Disable
2. Enable
Description/Function This feature is different from regular Call Waiting. This feature (if
enabled) allows UCD group members to hear a Call Waiting tone
when an inside / outside call arrives but all the extensions in the
UCD Group are busy.
Notes
• To use this feature, this setting must be set to enable.
• In addition, each extension must enable regular Call Waiting.
Reference • 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)