Panasonic KX-TD500 - Manual (Page 104)

System
104 Programming Guide
Parameter 25. Pressing DSS key operation in CO talking
Default Hold
Value Range 1. Disconnect
2. Hold
Description/Function If set to "Hold," the PT user engaged in a CO call can transfer the
current call to another extension simply by pressing the DSS button
associated with the destination extension.
Reference • 1.11 Transferring Features (F/G)
– One-Touch Transfer
Parameter 26. Pressing CO/DN/Answer key operation in talking
Default Hold
Value Range 1. Disconnect
2. Hold
Description/Function If set to "Hold," the PT user engaged in a call can, with a single
operation (press a CO/DN/Answer key), hold the current call and
then either get another line or answer another call.
Reference • 1.10 Holding Features (F/G)
– Automatic Hold—For Hold
Parameter 27. Message Waiting lamp pattern
Default #11
Value Range #01-#12
Description/Function Specifies a light pattern of the Message Lamp of an SLT.
Note
• Message Waiting lamp pattern list is provided on Page 101
and Page 102.
Reference • 1.17 Display Features (F/G)
– Message Waiting
• 2.2.4 When the Dialled Line is Busy or There is No Answer (U/
M)