Panasonic KX-TD500 - Manual (Page 41)

System
Programming Guide 41
2.2 Tenant
Used to assign various parameters on a tenant (1-8) basis.
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant (1-8) which you are going to programme.
Reference • 1.3 System Features (F/G)
– Tenant Service
Parameter Operator FDN
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the FDN (Floating Directory Number) of Extension
Group or Incoming Group. Calls by the feature number for
Operator Call will reach to this destination.
Reference • 1.3 System Features (F/G)
– Floating Station
• 1.6 Originating Features (F/G)
– Operator Call