Panasonic KX-TD500 - Manual (Page 111)

System
Programming Guide 111
Parameter 47. Tone Type for Outgoing Calls
Default Busy + Reorder
Value Range 1. Busy + Reorder
2. Busy
3. Reorder
Description/Function Specifies a tone type for outgoing calls.
Reference None
Parameter 48. Call Pickup with DSS S-CO key
Default Disable
Value Range 1. Enable
2. Disable
Description/Function By default, an S-CO button assigned to a DSS button (on a DSS
Console) is available for monitoring the call activity only, not
available for making / receiving a call.
If this parameter is enabled, an S-CO button (on a DSS Console)
can be used to answer the incoming CO call on the S-CO button and
retrieve the CO call held on the S-CO button.
Reference • 1.16 Button Features (F/G)
– Button, Line Access
Parameter 49. LCD Display Mode while CO talking
Default Caller ID
Value Range 1. Caller ID
2. Duration
Description/Function Specifies the initial display, Caller ID or Call Duration, which is
shown on the display while CO talking.
Reference • 1.5 Attended Features (F/G)
– Caller ID Service