HP 0706124 REV B User Manual
Page 99
Manual Calibrations
4-11
If you need to print a new calibration pattern, press
B (Pro-
ceed). The printer prints a calibration page.
When the calibration page has printed, the control panel
displays this prompt:
Take readings from left side of pattern.
9.
Press the
B key.
The control panel displays this message:
X Direction Registration
Head 2: +0
10. Examine the X direction pattern (in the left-hand group of
patterns) for the current head, and determine which pattern
of colored and black lines are the closest to perfectly aligned.
Use a printer’s loupe to select the pattern, since the lines in
the patterns may be difficult to discern otherwise.
11. Press the
C or p control panel keys repeatedly until the
number next to the pattern that is closest to aligned perfectly
is displayed.
Fig. 4-19. Head-to-Head Registration patterns
X-direction patterns
Y-direction patterns
Fig. 4-20. Sample head calibration patterns.
In this example, pattern “+1” is aligned the closest,
so “+1” would be entered.
+1
+2
+0