HP 0706124 REV B - Manual (Page 136)

B-4 Diagnostics
Diagnostics
The printer includes a series of self-diagnostic tests designed to
help MacDermid ColorSpan Technical Services solve printer
hardware problems. If one of the tests encounters an error, and
error message appears, which includes:
◆ Error code - always write down this code for future reference
by MacDermid ColorSpan Technical Services.
◆ Brief description of the error
◆ A series of buttons that allow you to respond to the error. In
some cases, you can ignore the error or enter a further diag-
nostic routine. In other cases, you must restart the printer.
During the course of operating the printer, another class of error
messages may appear on the control panel. The ATTN (Atten-
tion) key blinks on the Ready or Front Page screen when the
printer detects an error condition, or potential error condition.
When you press this button, the panel displays one or more
messages of the following types:
◆ Warnings — the printer has detected a condition that, if left
unaddressed, could result in substandard prints or a condi-
tion that will require an action before printing can continue.
Any action on your part is optional.
◆ Actions — the printer has detected an error condition that
stopped printing or will prevent printing from starting. You
must correct the error before the printer will be ready to
print.
The following table describes the Actions and Warnings in
detail. The cross-referenced page numbers refer to this manual.