HP 0706124 REV B - Manual (Page 31)

Parts Overview 1-19
15 Dryer tube — carries air blown from the dryer fans to
the printed output.
16 Ink reservoir tray (two places) — holds ink reservoir
boxes.
17 Takeup gearbox — powers the takeup spool to auto-
matically take up printed output.
18 VideoNet port — connects printer to print server.
19 Power inlets — connects printer and the dryer’s heater
to electrical power.
20 Standby power switch — places printer in standby
mode (to disconnect from power, disconnect power
cord).
21 Media advance switch — enables user to manually
advance media during loading.
22 Printhead carriage lock lever (two places) — locks
and unlocks the printhead assembly, for tilting it to the
upright position and returning it to the printing posi-
tion.
23 Printhead cover (three places) — secures the print-
heads to the carriage.
24 Printhead cover latch (three places) — locks the print-
head cover in place.
25 Printhead (replaceable, up to twelve places) —
delivers ink to the media.
26 Digital image sensor — detects the location of printed
pixels for precise alignment of the printheads.
27 Photodiode — enables the creation of color transforms
without an external spectrophotometer (requires print
server support), and the linearization of existing trans-
forms.
Index Description