Bosch 800 Series 30 Inch Freestanding Dual Fuel Range Use and Care Manual - Manual (Page 26)

26
Basic Settings
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting appears on the display,
e.g., †‹—¯š .
2. Press the v button again to change the selected
basic setting.
3. Use the A or @ button to change the basic setting.
4. Press the v button again to save the basic setting.
5. Use the @ button to navigate to the next basic setting.
6. Use the A or @ button to continue going through all of
the basic settings as described above and use the v
button to select and change the settings if necessary.
7. When you have finished, press and hold the v button
again for approx. 4 seconds to confirm the settings.
This applies all the basic settings.
You can change the basic settings again at any time.
Demo mode can only be activated within 5 minutes of
connecting the appliance to the mains power supply.
Note: Your changes to the basic settings will be retained
even after a power failure.
Basic setting Options
†‹—¯š Signal duration
upon completion of
a cooking time or
timer duration
‚‹ à“’ = approx.
10 seconds
„‹ à“’ = approx.
30 seconds*
‚ƒ‹ à“’ =
approx. 2 minutes
£‚¦“ ‹—
£
Waiting time until a
setting is applied
„ à“’ = approx.
3 seconds*
‡ à“’ = approx.
6 seconds*
‚‹ à“’ = approx.
10 seconds
£‹¯“ Button tone that
sounds when a but-
ton is touched
¯‹ = off
¢“à = on*
š‚à˜–
‘¢
Brightness of the
display illumination
‚ = dim
ƒ = medium*
„ = bright
’–‹’• Displays the clock
time
¯‹ = hide the clock
‚ƒ• ¢“à = dis-
play the 12-hour
clock*
ƒ…• ¢“à = dis-
play the 24-hour
clock
–‚Šœ£ Interior lighting on
when appliance in
operation
‹”” = no
‹¯ = yes*
’‹‹–
”‘¯
Cooling fan run-on
time
ƒ‰… °F / ‚…‹ °C
= At over 284 °F/
140 °C*
ƒ„‹ °F / ‚‚‹ °C
= At over 230 °F/
110 °C
‚ˆ‡ °F / ‰‹ °C =
At over 176 °F/
80 °C
‚…‹ °F / ‡‹ °C =
At over 140 °F/
60 °C
”‘’£‹§
¢
Reset all values to
factory settings
¯‹ = no*
¢“à = yes
š“¦‹ Activate demo
mode.
Demo mode is used
for demonstration
purposes – the
oven does not actu-
ally heat in demo
mode. Demo mode
can only be acti-
vated within 5 min-
utes of connecting
the appliance to the
mains power sup-
ply.
‹”” = no*
‹¯ = yes
£“¦˜
‚Ÿš
Set the temperature
unit.
”‘•§“Ÿ• = Fahr-
enheit (°F)*
’“–†‚—à = Cel-
sius (°C)
à‘››‘£
•
Sabbath mode avail-
able
‹”” = no*
‹¯ = yes
* Factory setting