beautypg.com

Operating the oven, Before using the appliance for the first time, Setting the time – Bosch 800 Series 30 Inch Freestanding Dual Fuel Range Use and Care Manual User Manual

Page 19: Use the a or @ button to set the time, Press the v button, Note, Prepping the oven, Remove protection film from parts, Clean the oven cavity with hot soapy water, Baking out the oven

background image

19

Operating the Oven

Before Using the Appliance for the First Time

Remove all packing materials and literature from the

cooktop surface.

Wipe with a clean, damp sponge and dry.

There may be a slight odor during the first several

uses. This is normal and will disappear.

Optimum cooking results depend on the proper

cookware being selected and used. See “Choosing

Cookware - Cookware Recommendations”.

Read all safety precautions and Use and Care Manual

information prior to operating.

Setting the time

Once the appliance is connected to a power supply,

‚ƒ

:

‹‹

flashes on the display. Set the time.

1.

Use the

A

or

@

button to set the time.

2.

Press the

v

button.

Note:

Once the period allowed for setting the time on

the clock has elapsed, the time will automatically be

saved.

The time has now been set.

Prepping the oven

1.

Remove the accessories and the rack guides from the

cooking compartment.

2.

Completely remove any leftover packaging, e.g. small

pieces of polystyrene, from the cooking compartment.

3.

Remove protection film from parts.

4.

Clean the outside of the appliance with a soft, damp

cloth.

5.

Clean the oven cavity with hot soapy water.

Baking out the oven
Pre-cleaning the oven

1.

Remove the accessories and the hook-in racks from

the cooking compartment.

2.

Completely remove any leftover packaging, e.g. small

pieces of polystyrene, from the cooking compartment.

3.

Some parts are covered with a protective film. Remove

this scratch protection film.

4.

Clean the outside of the appliance with a soft, damp

cloth.

5.

Clean the cooking compartment with hot soapy water.

Initial start up

In order to prevent excess smoke and odor from

manufacturing oils, heat up the oven for the first time

when it is empty and closed.

Note:

Make sure that there is no leftover packaging,

such as polystyrene pellets, in the oven cavity. Before

heating the appliance, wipe the smooth surfaces in the

oven cavity with a soft, damp cloth. Keep the kitchen

ventilated while the appliance is heating.

1.

Turn the function selector to

bake

.

2.

Use

@

to set the maximum temperature.

3.

Switch the oven off after one hour.

4.

Once oven has cooled wipe out with hot soapy water

and replace rack guides.

Note:

When the appliance is heating up for the first time,

you may hear crackling noises coming from the oven.

Re-cleaning the oven

1.

Clean the cooking compartment with hot soapy water.

2.

Refit the hook-in racks.

3.

If necessary, clean the door panels.

Cleaning the accessories

Before using the accessories, clean them thoroughly

using a cloth and warm soapy water.

Fitting the telescopic rack set

Instructions on fitting the telescopic rack set are

enclosed with the set.

This manual is related to the following products: