Close-up, Frame the subject and take a picture, Select [ noise reduction burst ] or [ single shot – Nikon COOLPIX P950 Digital Camera User Manual
Page 86
86
Scene mode (shooting suited to the shooting conditions)
2
Frame the subject and take a picture.
•
The camera focuses on the area in the center of the frame. The position of the area
cannot be moved.
•
The camera focuses at infinity.
•
For [
Hand-held
]:
-
While the icon on the shooting screen is displayed in green, press the shutter-
release button all the way to capture a series of images which are combined into a
single image and saved.
-
Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera off before
the screen switches to the shooting screen.
•
For [
Tripod
]:
-
One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
Notes about [Hand-held]
•
The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.
•
Continuous shooting may not be possible in certain shooting conditions.
Notes about [Tripod]
Vibration reduction is disabled regardless of the setup menu [
Vibration reduction
]
setting. See “ Using a tripod (page 51)” when using a tripod.
Close-up
Use when taking close-up pictures of small subjects such as flowers and insects.
Rotate the mode dial to
button
Close-up
button
Option
Description
Noise reduction burst
This enables you to shoot a sharp image with a minimum of
noise.
Single shot
(default setting)
Saves images with emphasized outlines and contrast.
1
Select [Noise reduction burst] or [Single shot].