Nikon COOLPIX P950 Digital Camera User Manual
Page 277
277
Troubleshooting
Paired smart devices are not connected through Bluetooth
automatically.
• Set the following in the [
[
Airplane mode
]: [
Off
]
[
Choose connection
]: [
Smart device
]
[
Bluetooth
] [
Connection
]: [
Enable
]
• If the camera is paired with multiple smart devices, select the smart device you
want to connect in the [
] [
Bluetooth
] [
Paired
devices
] in the camera.
• After performing the setup menu [
Reset all
[
Restore default settings
] in the camera, unpair in SnapBridge and then pair
again.
• If multiple cameras are registered in the SnapBridge app, switch to the camera you
want to connect using the SnapBridge app.
Cannot upload images to a smart device that is connected with
the SnapBridge app.
• You can upload automatically through the auto link feature only when connected
through Bluetooth. To upload automatically, set the following.
In the camera, [
] [
Send while shooting
] [
Still
images
]: [
Yes
]
SnapBridge app
tab [
Auto link
] [
Auto download
]: Enable
] [
Bluetooth
] [
Send while off
] [
Off
]
is selected in the camera, change the setting to [
On
] or turn on the camera.
• When there is a large number of images to upload during Bluetooth
communication, communication may be disconnected while uploading. Image
upload resumes after a while if the camera’s [
[
Bluetooth
] [
Send while off
] is set to [
On
]. To resume quickly, turn the camera
off and then on again.
• Insert a memory card into the camera.
• You may not be able to upload images or uploading may be canceled while the
camera is being operated.
Cannot download the original files of still images on the smart
device that is connected with the SnapBridge app.
For [
Send while shooting
] and [
Mark for upload
] in the camera, still images are
uploaded at an image size of up to 2 megapixels. To upload original files, use
[
Download pictures
] in the SnapBridge app.