Cannot send a fax, Cannot send a fax(p. 614), Step 1: checking the original – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 623: Step 2: checking the status of the machine
Cannot Send a Fax
8W0J-0H0
Troubleshoot by checking the following steps:
Step 1: Checking the Original(P. 614)
Step 2: Checking the Status of the Machine(P. 614)
Step 3: Checking the Send Status(P. 615)
Step 1: Checking the Original
Is Original Placed Correctly?
Place the original correctly while paying attention to the orientation of the side to be scanned.
When Placing It on the Platen Glass
Place the original with the side to be scanned face down. Placing Originals on the Platen Glass(P. 139)
When Placing Originals in the Feeder
Place the original with the side to be scanned face up. Placing Originals in the Feeder(P. 140)
Step 2: Checking the Status of the Machine
Is the Processing/Data Indicator on the Control Panel Lit or Blinking?
If so, data is being processed. Data is sent after the Processing/Data indicator turns off. Control Panel(P. 14)
Is the Telephone Cord Connected Correctly?
Check that the supplied telephone cord is connected correctly to the telephone line jack (LINE) on the machine
and the telephone line connector on the wall, and fix the connection, as needed.
For details about the connection method, see the procedure for connecting to the telephone line. Step 4:
Connecting to Telephone Line(P. 104)
Troubleshooting
614