Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 308)

4
Select [Copy Ratio] and press .
➠ The [Copy Ratio] screen is displayed.
5
Select the copy ratio to suit your purpose and press .
Set the ratio for enlarging or reducing copies.
Select a fixed copy ratio from the list or select [Custom Ratio] and enter a custom ratio using the numeric
keys.
You can specify a value from 25% to 400% in 1% increments.
6
Configure the other copy settings, as needed. Additional Copying Features(P. 300)
You can perform 2-sided copying and adjust the image quality and other settings to suit your original and
purpose.
7
Press on the control panel.
➠ Copying starts.
● To cancel copying, press [] [] . Canceling Copy Operations(P. 323)
● Press on the control panel to view the copy job status. Viewing the Print Job Status and Log(P. 223)
When [Scan Next: Press Start] appears
When an original is placed on the platen glass and copied using 2-sided copying or N on 1, the screen is
displayed for scanning the next original.
1
Place the next original on the platen glass, and press on the control panel.
➠ The next original is scanned, and the same screen is displayed.
Repeat this process until scanning of all originals is completed.
● You can press [Density] and [Original Type] to change the settings for each original.
● If the size of the original is different, part of the image may be missing, or the image may be printed
smaller on the paper.
2
Select [] press .
➠ The scanned originals are printed.
Copying
299