Tx start speed](p. 495), Check dial tone before sending, Set line – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 504: Tx start speed
[
On
]
[Check Dial Tone Before Sending]
[Menu] [Function Settings] [Send] [Fax Settings]
Specify whether to check for a dial tone before dialing when sending a fax.
[
Off
]
[On]
[Set Line]
[Menu] [Function Settings] [Send] [Fax Settings]
Specify the machine's fax number, unit name, and the number of lines.
* The fax number and unit name are sent to the recipient as sender information. [TX Terminal ID](P. 497)
[Register Unit Telephone Number]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the fax number of the machine. Changing the Fax Number and Unit Name(P. 272)
[Register Unit Name]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the name (unit name) sent to the other party. Changing the Fax Number and Unit Name(P. 272)
[Select Line Type]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Specify the type of the line connected to the machine.
[Pulse]
[
Tone
]
[TX Start Speed]
[Menu] [Function Settings] [Send] [Fax Settings]
It may take some time for transmission to begin due to factors such as a poor phone line connection. If this occurs,
adjust the initial communication speed to a lower level.
[
33600 bps
]
[14400 bps]
[9600 bps]
[7200 bps]
[4800 bps]
[2400 bps]
Settings Menu Items
495