Maintenance, Clean fixing assembly, Control condensation – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 472

[Maintenance]
8W0J-09X
Carry out maintenance to clean the machine and control condensation.
* Values in bold red text are the default settings for each item.
[Clean Fixing Assembly](P. 463)
[Control Condensation](P. 463)
[Clean Fixing Assembly]
[Menu] [Adjustment/Maintenance] [Maintenance]
Perform this operation to clean the fixing assembly if black streaks appear on printed paper following procedures such
as toner cartridge replacement. Cleaning the Fixing Assembly(P. 530)
[Control Condensation]
[Menu] [Adjustment/Maintenance] [Maintenance]
In environments subject to sudden temperature changes, condensation may form and cause images and/or text to be
faint or blurred. If so, specifying [On] may improve the print results.
While removing condensation, a blank sheet of paper may be output because printing is not performed properly.
Setting this to [On] saves every received fax to the memory. Or, you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The Auto Shutdown
Time setting is disabled.
Touch Panel Model
[
Off
]
[On]
[
Use Fax Memory Lock
]
[Use Fax Mem. Lock+Do Not Allow Job Print]
5 Lines LCD Model
[
Off
]
[On]
[
Allow Job Printing During Process
]
[Do Not Allow Job Printing During Process]
Settings Menu Items
463