Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 484)

* Note that you cannot adjust the toner density if [Toner Save] is set to [On]. [Toner Save](P. 475)
* [Density] may not be displayed depending on the model, the installed options, and other settings.
[Density]
17 levels
[Density (Fine Adjust)]
[High]/[Medium]/[Low]
17 levels
[Toner Save]
[Menu] [Function Settings] [Printer] [Printer Settings] [Print Quality]
Specify whether to save toner when printing.
Specify [On] in this setting when you only want to check the layout or other finishing prior to the final print,
such as before printing a very large job.
[ Off ]
[On]
[Image Refinement]
[Menu] [Function Settings] [Printer] [Printer Settings] [Print Quality]
Specify whether to use the smoothing process which allows printing outlines of characters or diagrams
smoothly.
[Off]
[
On ]
[Resolution]
[Menu] [Function Settings] [Printer] [Printer Settings] [Print Quality]
Specify the resolution used to process print data.
To print with a higher resolution, specify [1200 dpi] in this setting.
[1200 dpi]
[
600 dpi ]
[Layout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the gutter direction or margin and the print position.
[Binding Location]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Specify whether the gutter will be on the long edge or the short edge when the printed document will be
bound using a method such as staples.
Use this setting in conjunction with the [Gutter] setting to adjust the binding position and margins. [Gutter]
(P. 476)
● To bind the paper on the long edge, specify [Long Edge] in this setting.
Settings Menu Items
475