Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 55)

Attention (Loading Paper)
85RS-016
CAUTION
Adjust the paper guides to the paper width without space.
Handle paper carefully not to cut your hands with the edges of the paper.
IMPORTANT
Be sure to align the paper guides with the width of the paper.
● If the paper guides are too loose or too tight, this may result in misfeeds or paper jams.
● Printouts may be askew depending on the printing environment. Properly load paper to avoid this.
Be sure to adjust paper sizes to the documents.
Adjust the size of the paper loaded in the paper cassette to the documents.
When the paper which is loaded in the paper cassette is smaller than the documents, the output may be
dirty with the toner that is placed outside of the paper.
When using paper that has been poorly cut
If you use paper that has been poorly cut, multiple sheets of paper may be fed at once. In this case, fan
the paper thoroughly, and then align the edges of the stack properly on a hard, flat surface.
Do not exceed the load limit mark when loading paper.
Make sure that the paper stack does not exceed the line of the load limit mark. If the paper stack exceeds
the load limit mark lines, this may result in misfeeds.
When printing on envelopes
Load envelopes with the front side (non-glued side) facing up. You cannot print on the reverse side of
envelopes.
Also, be sure to close the flap before loading envelopes.
NOTE
For more information on supported paper types
" Supported Paper Types(P. 70) "
Abbreviations on the paper guides inside the paper cassette
Paper size Paper guide
Legal LGL
Letter LTR
Executive EXEC
Basic Operation
50