Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 124)

Scanning using an application
When the WIA driver is displayed, use the following steps. For the instructions on how to display the WIA driver,
see " Scanning an Image Using an Application(P. 116) ".
1
Place your document.
" Placing Documents(P. 43) "
" Supported Document Types(P. 67) "
NOTE
To scan from the platen glass
You cannot scan more than one document at a time.
2
Select a picture type.
Select one of the following types.
● [Color picture]
● [Grayscale picture]
● [Black and white picture or text]
● [Custom settings]
3
Click [Adjust the quality of the scanned picture] as needed.
The [Advanced Properties] dialog box appears.
4
Adjust the image quality and click [OK].
[Appearance] A sample image is displayed.
[Brightness] Specify the brightness (-127 to 127).
[Contrast] Specify the contrast (-127 to 127) (only for color or grayscale scans).
[Resolution (DPI)]
Supported resolutions vary, depending on the operating system or the selected [Paper
source] setting.
[Picture type] Specify the color type.
Scan
119