Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 11)

Power Supply
85RS-003
WARNING
● Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull
on or excessively bend it. This can cause electrical damage, resulting in fire or electrical shock.
● Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation
to melt, resulting in a fire or electrical shock.
● The power cord should not be taut, as this may lead to a loose connection and cause overheating,
which could result in a fire.
● The power cord may become damaged if it is stepped on, fixed with staples, or if heavy objects are
placed on it. Continued use of a damaged power cord can lead to an accident, such as a fire or
electrical shock.
● Do not plug or unplug the power plug with wet hands, as this can result in electrical shock.
● Do not plug the power cord into a multiplug power strip, as this can result in a fire or electrical shock.
● Do not bundle up or tie up the power cord in a knot, as this can result in a fire or electrical shock.
● Insert the power plug completely into the AC power outlet. Failure to do so can result in a fire or
electrical shock.
● If excessive stress is applied to the connection part of the power cord, it may damage the power cord
or the wires inside the machine may be disconnected. This could result in a fire. Avoid the following
situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and continuous stress is being applied to the
power outlet or the connection part.
- Applying a shock to the power connector.
● The machine must be connected to a socket-outlet with grounding connection by the provided power
cord.
● Do not use power cords other than the one provided, as this can result in a fire or electrical shock.
● The provided power cord is intended for use with this machine. Do not connect the power cord to
other devices.
● As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical
shock.
● Remove the power plug from the AC power outlet and refrain from using the machine during a
thunder storm. Lightning can result in a fire, electrical shock or malfunction.
● Make sure that the power supply for the machine is safe, and has a steady voltage.
CAUTION
Important Safety Instructions
6