Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 79)

79
English
PC auto setting
Sets the operational mode of the automatic position
adjustment in the [Position] menu.
[Off]:
Automatic position adjustment starts when
SETUP> is pressed on the remote control or
automatic position adjustment is executed from the
[Position] menu.
[On]:
Other than remote control or menu operation,
automatic position adjustment starts:
• When the display power is turned ON.
• When the input signal is switched.
Off-timer function
Enables / disables Off timer function.
[Enable]:
Enables the [Off-timer function].
[Disable]:
Disables the [Off-timer function].
Note
● When [Disable] is set, the Off-timer is cancelled.
Initial startup
Sets the power mode of the unit for when the power
recovers from failure or after plugging off and in again.
[Last memory]:
Power returns in as the same state as before the
power interruption.
[On]:
Power returns in power On.
(Power Indicator: green)
[Standby]:
Power returns in standby mode.
(Power Indicator: red/orange)
Note
● When using multiple displays, [Standby] is preferred
to be set in order to reduce a power load.
Clock display
Sets to display / hide the clock.
[Off]:
Hides the clock.
[On]:
Displays the clock.
Note
● The clock is displayed at the lower left of the screen
when button is pressed.
● When [Date and time] is not set, the clock is not
displayed even when [Clock display] is [On]. (see
page 68)
Power on message(No activity power
off)
Sets to show/hide [No activity power off] precautions
when the power is turned on.
[On]:
The warning precautions are shown when the
power is turned on.
[Off]:
The warning precautions are not shown when the
power is turned on.
Note
● This setting is enabled only when [No activity power
off] is [Enable] (see page 67).
Power on message(Power
management)
Sets to show/hide an information message that tells
the power has been turned off by “Power management”
function when the power is turned on.
[On]:
The information is shown when the power is turned
on.
[Off]:
The information is not shown when the power is
turned on.
Note
● This setting is enabled only when “Power
management” function is [On] (see page 65).
POWER button lock
Sets the lock setting for ( ).
[On]:
operation is disabled.
[Off]:
operation is enabled.