Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 32)

English
32
Remote Control Transmitter
1 POWER ON ( )
● Turns the power on (Picture is displayed.) when
the
( ) and in Standby condition. (see page 33)
2 STANDBY ( )
● Turns the power off (Standby condition) when the
and the picture is displayed. (see page 33)
3 ASPECT
● Adjusts the aspect. (see page 37)
4 DEFAULT
● Resets the settings of picture, sound, etc., to
defaults. (see page 41, 43, 44)
5 ENTER / Cursor buttons ( )
● Used to operate the menu screens. (see page 39)
6 INPUT
● Switches input to display on the screen. (see
page 35)
7 MUTE
● Sound mute on / off. (see page 36)
8 PICTURE
(see page 44)
9 SOUND
(see page 43)
10 POSITION
(see page 41)
11 Numeric buttons (0 - 9)
● Used to input ID number when using several
Displays. (see page 112)
● Used as shortcut buttons by assigning frequently
used operations. (see page 73)
12 FUNCTION GROUP
(see page 73)
13 ID MODE
(see page 112)
14 Signal emission
15 Remote control operation Indicator
● Flashes when remote control buttons are pressed.
16 AUTO SETUP
● Automatically adjusts the position/size of the
screen. (see page 41)
17 MULTI DISPLAY
● Switches [On] / [Off] in [Multi display setting]. (see
page 57)
18 RETURN
● Used to return to the previous menu. (see page 39)
19 RECALL
● Displays the current setting status of Input mode,
Aspect mode, etc. (see page 35)
20 VOL + / VOL -
● Adjusts sound volume level. (see page 36)
21 SETUP
(see page 50)
22 OFF TIMER
● Switches to stand-by after a fixed period. (see
page 36)
23 ECO
● Switches the settings of [Power management
mode]. (see page 65)
24 ID SET
● Used to set remote control ID number when using
several Displays. (see page 112)
Note
● In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: .)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.