Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 20)

English
20
Before connecting
● Before connecting cables, carefully read the operating
instructions for the external device to be connected.
● Turn off the power of all devices before connecting
cables.
● Take note of the following points before connecting
the cables. Failure to do so may result in
malfunctions.
• When connecting a cable to the unit or a device
connected to the unit itself, touch any nearby
metallic objects to eliminate static electricity from
your body before performing work.
• Do not use unnecessarily long cables to connect
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
• When connecting cables, connect GND first, then
insert the connecting terminal of the connecting
device in a straight manner.
● Acquire any connection cable necessary to connect
the external device to the system that is neither
supplied with the device nor available as an option.
● If the outer shape of the plug of a connection cable
is large, it may come in contact with the plug of an
adjacent connection cable. Use a connection cable
with the suitable plug size for the terminal alignment.
● If video signals from video equipment contain too
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
● When the sync signals output from PC or video
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
● The unit accepts YC
B
C
R
/YP
B
P
R
signals, analogue
RGB signals and digital signals.
● Some PC models are not compatible with the unit.
● Use cable compensator when you connect devices to
the unit using long cables. Otherwise the image may
not display properly.
● Refer to “Preset Signals” (see page 114) for the types
of video signals that can be displayed with the unit.
HDMI terminal connection
Note
● Video equipment and HDMI cable shown are not
supplied with this unit.
● Some HDMI equipment may not be able to display
picture.
● For audio, it is also possible to use AUDIO1 IN /
AUDIO2 IN terminal input. (For [Audio input select]
function, see page 77.)
● This Display does not support HDMI-CEC (HDMI
Consumer Electronics Control) (VIERA LINK).
HDMI cable (commercially available)
DVD Player
PC