Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 55)

55
English
■
[Serial response (Normal)]
Sets whether to send the response command to normal
commands without ID.
[Off]:
Does not respond. (Including the inquiry command)
[On]:
Responds.
■
[Serial response(ID all)]
Set whether to respond to the command or not, when
serial command of ID number “0” is received.
[Off]:
Does not respond.
[On]:
Responds.
■
[Serial ID group]
When controlling multiple displays simultaneously via
serial communication, those displays are grouped as
one.
A to G (7 groups)
■
[Serial response(ID group)]
Sets whether to respond to the command or not,
when serial command, which the group is specified, is
received.
[Off]:
Does not respond.
[On]:
Responds.
■
[Serial daisy chain position]
Sets the first and the last terminals of the daisy chain
connection when serial-controlling this unit by the
daisy chain connection (including connection via the
SERIAL IN/OUT terminal or via DIGITAL LINK, or mixed
connection).
[---]:
When controlling this unit alone with serial control, or
connecting at a position other than the first and last
terminals in a daisy chain
[Top]:
When connecting at the first terminal in a daisy chain
[End]:
When connecting at the last terminal in a daisy chain
■
[Multi control auto setting(DIGITAL LINK)]
When connected with the DIGITAL LINK daisy chain,
display IDs are automatically assigned to all the
displays, and the serial IN/OUT terminals, remote control
IN/OUT terminals and the network are automatically set.
Select [Multi control auto setting(DIGITAL LINK)]
with and press .
1
0
192.168.0.8
Multi control auto setting(DIGITAL LINK)
Status
Display ID
Start
Network control / IP address
Display ID
Wait
Yes
Off
Changing network control
DIGITAL LINK daisy chain 020/025
Serial ID / Terminal On SERIAL IN
Serial out terminal SERIAL OUT
Controller ID / Terminal On Built-in
Controller out terminal IR OUT
Yes Changing Serial/IR terminal
The following screen is displayed on the subsequent-
stage displays.
0
192.168.0.8
Multi control auto setting(DIGITAL LINK)
Status
Display ID
Network control / IP address
Wait
Off
DIGITAL LINK daisy chain 021/025
[Status]
Displays the execution state of the display ID auto
setting.
[Wait]:
ID auto setting has not been executed yet.
[Finished]:
ID auto setting is completed.
[DIGITAL LINK daisy chain]
Displays the connection number counted from the
first unit to this unit out of total displays connected via
DIGITAL LINK.
[Display ID]
Displays the current display ID.
[Network control / IP address]
Displays [On] / [Off] of [Network control] function and
IP address.
[Serial ID / Terminal]
Displays ON/OFF of the function to control with
ID, and displays the terminal to use when serial-
controlling.
[Serial out terminal]
Displays the terminal used for the serial
communication output.
[Controller ID / Terminal]
Displays ON/OFF of the function to control with ID,
and displays the terminal to use when controlling with
the remote control.