Options adjustments – Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display User Manual
Page 76
English
76
Options Adjustments
This unit offers special functions conveniently used
according to the installation location and application.
■
Remote control
1
Press
[Setup] menu screen will be displayed.
2
Select [OSD language] with
and press
seconds.
Following screen will be displayed.
Options
Display software information
USB data cloning
Software licenses
LAN data cloning
Shipping
Cloning password
3
Select [Options] with and press
[Options] menu screen will be displayed.
1/2
0
0
Options
Audio input select
Long life settings
Onscreen display
Initial VOL level
Initial input
Maximum VOL level
Input lock
Button lock
Controller user level
PC auto setting
Off
Off
Off
On
Off
Off
Off
Off
2/2
Protocol 2
Off
Off
Options
Off-timer function
Initial startup
Power on message(No activity power off)
Power on message(Power management)
Information timing
Off
Enable
Last memory
POWER button lock
LAN control protocol
Off
Clock display
OSD Memory
On
4
Select the item to set with .
For [Audio input select], [Long life settings] and
[Information timing], the submenu screen will be
displayed when you press
(see page 77, 77, 80)
5
Set with .
6
Press
menu.
■
Unit
1
Press
and display the [Setup] menu.
2
Select [OSD language] with ,
and then press and hold
(Unit)> for more than 5 seconds.
3
Select [Options] with and press
[Options] menu screen will be displayed.
4
Select the item to set with .
For [Audio input select], [Long life settings] and
[Information timing], the submenu screen will be
displayed when you press
(see page 77, 77, 80)
5
Set with <- (Unit)> or <+ (Unit)>.
6
Press
times to exit from [Options] menu.
Note
●
The remote control is necessary to operate [Initial
VOL level] and [Maximum VOL level] in the [Options]
menu.
●
Press
Display software information
Displays the serial number and software version of this
unit.
Software licenses
Displays the software license.
Cloning password
Sets the password for the cloning function.
For more detail of the settings, see “Changing the
cloning password”. (see page 110)
Note
●
The initial password in the factory default state is
[AAAA].
●
Change the password periodically, and set one which
is difficult to guess.
●
For initialization method for the cloning password,
consult the dealer where you purchased the product.
USB data cloning
LAN data cloning
Copies the data of a single display to multiple displays
by using the USB memory device or via LAN. For more
detail of the settings, see “Using data cloning”. (see
page 106)