Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 63)

63
English
[Mode 2]:
If a video signal (synchronized signal) is detected
at any of the input terminals for which the “Power
management” function is set to [On], the power
is turned “ON”, and the input is switched to the
detected input.
[Mode 3]:
Even when the power is turned off using the
remote control, if a video signal (synchronized
signal) is newly detected at any of the input
terminals for which the “Power management”
function is set to [On], the power is turned “ON”,
and the input is switched to the detected input.
This function does not operate if the power plug is
removed from the outlet. Turn the power “ON” once
to use this function.
Note
● When [Input search] is [All inputs] or [Custom], the
[Input search] function is prioritised. (The “Power
management” function does not operate for each
terminal.) (For details of [Input search] function, see
page 56.)
● When [Failover/Failback] - [Input change mode] is
set to items other than [Off], the [Failover/Failback]
function is prioritised. (The “Power management”
function does not operate for each terminal.) (For
details of [Failover/Failback] function, see page 57.)
■
[Changing delay]
Sets the delay time until the input is switched when
[Power management mode] is [Input detection].
[Off]:
Switches the input if a signal is interrupted even for
a very short period.
1 to 10:
Sets the delay time (sec.). Switches the input when
the set time has elapsed after detecting no signal
is present. However, if the detection period during
which no signal is present is shorter than the set
delay time, the input is not switched.
Note
● The operation when [Input detection] is selected is the
same as the operation when [Input search] is set to
[Input detection]. (see page 56)
Audio input select
[Audio input select] - submenu screen
Audio input select
HDMI3 HDMI3
USB-C USB-C
PC AUDIO IN
HDMI1 HDMI1
HDMI2 HDMI2
SLOT SLOT
Screen Transfer Screen Transfer
PC[YP
B
P
R
] AUDIO IN
Video input Audio input
HDMI1 HDMI1 / AUDIO IN / No audio
HDMI2 HDMI2 / AUDIO IN / No audio
HDMI3 HDMI3 / AUDIO IN / No audio
USB-C USB-C / AUDIO IN / No audio
SLOT SLOT / AUDIO IN / No audio
PC AUDIO IN / No audio
PC[YP
B
P
R
] AUDIO IN / No audio
Screen Transfer
Screen Transfer / AUDIO IN /
No audio
● No audio: No audio input (Mute)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
HDMI1
Full
AUDIO IN