Select the language with and press Page 34
Page 34
34
English
■
To turn the power ON/OFF with the remote
control
To turn the power on
●
When the
Indicator - orange or purple), press OFF) button> then the picture will be displayed. ● Power Indicator: Blue (Picture is displayed.) To turn the power off ● When the Indicator - blue), press then the power will be turned off. ● Power Indicator: Orange or purple (standby) Note ● During operation of the “Power management” function (see page 61), the power indicator turns purple in the power off state. ● After the power plug is disconnected, the power indicator may remain lit for a while. This is not a malfunction. ● The display turns off if the turned OFF ( ) or press the button> ( ) on the unit while the unit is ON (picture is displayed) or OFF (standby state). ● When [Power LED light-up setting] is set to [Off], the power indicator does not light up. (see page 86 [Power LED light-up setting]) ■ When the Unit is turned on for the first time Following screen will be displayed. 1 Select the language with and press English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD language 2 For vertical installation, select [Portrait] with and press Display orientation Landscape Portrait Note ● Once the items are set, the screens won’t be displayed when switching on the unit next time. Each item can be reset in the following menus. 3 Configure the network account setting as necessary. Administrator account settings Password policy Save Skip Password User name dispadmin Please set the user name and password.If not set, could not use the Web Control function and for communication control via a LAN (including Panasonic application software). Password policy Cautions regarding the password setting in this item are displayed on another window. Password policy ·Reusing passwords is not recommended. characters of at least three of the following four types is recommended. User name A keyboard for user name setting is displayed. Enter the user name. ● Entering characters (see page 165) Password A keyboard for password setting is displayed. After the password is entered, select [Ok] to display a confirmation screen. Enter the password again and select [Ok] to determine the password. Save The user name and password set above are saved in the display unit. Skip Exits this screen without configuring this setting. Note ● Once set or skipped, this screen won’t be displayed when switching on the unit next time. Use the following menu to configure the setting again.
[OSD language] (see page 68)
[Display orientation] (see page 86)
·Password cannot be blank.
·A password consisting of at least eight half-width characters and contaning
·Uppercase letters
·Lowercase letters
·Digits
·Symbols (~!@#$%^&*()_+|}{][<>.,/?`)
[Network settings] (see page 74)