Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 169)

169
English
Shipping condition
It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup] and
[Position] menus and user image registered in [Setup] -
[Image settings]
■
Remote control
1 Press to display the [Setup]
menu.
2 Select [Options] with and press
.
The following screen will be displayed.
Display information
Options
Software licenses
Cloning password
USB data cloning
Security password
LAN data cloning
Output log data
Shipping
3 Select [Shipping] with and press
.
Shipping
Yes No
4 Select [Yes] with and press
.
The message [Shipping ( Wait a moment )] will be
displayed.
5 After the message [Please turn off
the power.] is displayed, turn the
power off pressing
Off button> ( ).
● If the
please disconnect the AC cord plug from the wall
outlet.
■
Unit
1 Press
times and display the [Setup] menu.
2 Select [OSD language] with , and
then press and hold
for more than 5 seconds.
3 Select [Yes] with <- (Unit)> and press
.
The message [Shipping ( Wait a moment )] will be
displayed.
4 After the message [Please turn off
the power.] is displayed, turn the
power off pressing
Off button> ( ).
● If the
please disconnect the AC cord plug from the wall
outlet.