Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 110)

110
English
Confirming the information of the self-signed certificate
Confirm the information of the self-signed certificate generated by the Display.
1 Click [Certificate ] → [ Self-signed Certificate ] → [ Information ] → [ Confirm].
The information of the generated self-signed certificate is displayed. The details of each item are as follows.
Item Details
[Common Name] The Display name or the IP address is displayed.
[Country] The country code defined in ISO 3166-1 alpha-2 (two upper case alphabets) is displayed.
[State] The State, etc. is displayed.
[Locality] The locality is displayed.
[Organization] The organization name is displayed.
[Organization Unit] The organization unit name is displayed.
[Not Before] Displays the date and time that the self-signed certificate was issued.
[Not After]
Displays the date and time that the self-signed certificate will expire (local time
corresponding to 23:59, December 31, 2035 in Greenwich Mean Time).
[CRT key]
[RSA key size] The key length of the CRT key is displayed.
[Last modified] The generation date and time of the CRT key is displayed.
Note
● The generated self-signed certificate can be deleted by clicking [Certificate ] → [ Self-signed Certificate ] → [ Delete].
However, it cannot be deleted when [HTTPS set up ] → [ Connection] is set to [HTTPS]. Delete it after changing the
setting to perform the HTTP communication.
■
[HTTPS set up] page
Set this page when HTTPS (Hypertext Transfer Protocol Secure) communication encrypted with the SSL/TLS protocol
is to be performed between the computer and the Display while the web control function is used.
Click [Detailed set up
] → [ HTTPS set up].
To perform the HTTPS communication, it is necessary to install the certificate for authentication into the Display in
advance. For details of installing the certificate, refer to “[Certificate] page” (see page 103).
[Connection]
Sets the connection method to the Display.
[HTTP]: Uses the HTTP communication. (Factory
default setting)
[HTTPS]: Uses the HTTPS communication.
[HTTPS port]
Sets the port number to be used with the HTTPS
communication.
Allowed port number: 1 to 65535
Factory default setting: 443
[Set]
Enables the setting.
Note
● When the [Connection] setting is changed from [HTTPS] to [HTTP], the screen may not be displayed when the
operation or update of the web control screen is performed. In such case, delete the cache of the web browser.