Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 35)

35
English
■
Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON. (see page 67)
“Power management” information
Last turn off due to ’Power management’.
When “Power management” is functioned, an
information message is displayed every time the power
is turned ON. (see page 61)
COLOUR DESIGN Information
Colour design settings are universal.
The information is displayed when [Setup] - [Colour
design settings] - [Colour design] is set to [Universal].
These message displays can be set with the following
menu:
● [Power on settings] menu
Information(No activity power off)
(see page 55)
Information(Power management)
(see page 55)
Information(Colour design)
(see page 56)
Selecting the input signal
Select the signals input to the unit.
Press or .
Unit
INPUT ENTER MENU
+ -
Switches input every time the buttons are pressed.
INPUT
HDMI1
HDMI2
HDMI3
USB-C
SLOT
PC
PC[YP
B
P
R
]
Screen Transfer
USB
MEMORY VIEWER
WHITEBOARD
[HDMI1] → [HDMI2] → [HDMI3 ] → [ USB-C ] →
[SLOT] → [PC] → [Screen Transfer] →
[USB] or [Internal Memory] → [ MEMORY VIEWER] →
[WHITEBOARD]
[HDMI1]: HDMI IN 1 terminal, HDMI input
[HDMI2]: HDMI IN 2 terminal, HDMI input
[HDMI3]: HDMI IN 3 terminal, HDMI input
[USB-C]: USB-C HOST terminal, USB-C input
[SLOT]: Input signal of the function board
[PC]
* 1 : PC IN terminal, PC input
[Screen Transfer]:
Input that displays images transmitted via network using
“Screen Transfer”, a dedicated application by Panasonic
[USB]
* 2 : USB terminal, USB input
[Internal Memory] * 2 : Image input from the internal
memory
[MEMORY VIEWER]: USB terminal, “Memory viewer”
input
[WHITEBOARD]: The screen switches “WHITEBOARD”
input.
* 1 : [PC] may be displayed as [PC [YP
B
P
R
]] depending
on the settings of [PC input mode]. (see page 86)
* 2 : For [USB] and [Internal Memory] input, either one
selected for the [Use memory select] setting is
displayed. (see page 87)