Built-in diagnostics – Dell C2722DE 27" 16:9 IPS Video Conferencing Monitor User Manual
Page 105

Troubleshooting
|
105
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with your
computer and video card.
Display Info
To run the built-in diagnostics:
1.
Ensure that the screen is clean (no dust particles on the surface of the screen).
2.
Press and hold Up or Down or Left or Right direction for four seconds until a
menu appears on the screen.
3.
Using the joystick control, highlight the Diagnostics
option and press the
joystick button to start the diagnostics. A gray screen is displayed.
4.
Observe if the screen has any defects or abnormalities.
5.
Toggle the joystick once again until a red screen is displayed.
6.
Observe if the screen has any defects or abnormalities.
7.
Repeat steps 5 and 6 until the screen displays green, blue, black, and white
colors. Note any abnormalities or defects.
The test is complete when a text screen is displayed. To exit, toggle the joystick control
again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool,
the monitor is functioning properly. Check the video card and computer.
- U2723QE 27" 16:9 4K UHD HDR IPS Monitor with USB Type-C Docking UltraSharp 31.5" 4K HDR Video Conferencing Monitor U2722D 27" 16:9 IPS Monitor G3223Q 32" 4K HDR 144 Hz Gaming Monitor UltraSharp 30" 1600p USB Type-C Hub Monitor U2421E UltraSharp 24.1" 16:10 USB Type-C Hub IPS Monitor UltraSharp 40" 5K Curved Monitor