ProSoft Technology 5201-DFNT-104C - Manual (Page 98)

Diagnostics and Troubleshooting 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 98 of 139 ProSoft Technology, Inc.
August 4, 2011
Viewing SNTP Status
Press [N]
to view configuration information about the SNTP Client.
For more information on configuring and using this function, see SNTP Client
(page 17).
Sending the Configuration File
Press [S]
to upload (send) a configuration file from the gateway to your PC.
Resetting Diagnostic Data
Press [U]
to reset the status counters for the Client and/or server(s) in the
gateway.
Viewing Version Information
Press [V]
to view version information for the gateway.
Use this command to view the current version of the software for the gateway, as
well as other important values. You may be asked to provide this information
when calling for technical support on the product.
Values at the bottom of the display are important in determining gateway
operation. The Program Scan Counter value is incremented each time a
gateway’s program cycle is complete.