ProSoft Technology 5201-DFNT-104C - Manual (Page 121)

104C Version 3 ♦ ProLinx Gateway Reference
IEC 60870-5-104 Client (Firmware v3.xx) Protocol Manual
ProSoft Technology, Inc. Page 121 of 139
August 4, 2011
Parameter in control direction
(Station-specific parameter, mark each Type ID 'X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
⌧
<110> := Parameter of measured value, normalized value P_ME_NA_1
⌧ <111> := Parameter of measured value, scaled value P_ME_NB_1
⌧ <112> := Parameter of measured value, short floating point value
P_ME_NC_1
⌧ <113> := Parameter activation P_AC_NA_1
File transfer
(Station-specific parameter, mark "X" if function is used)
File transfer in monitor direction
Transparent file
Transmission of disturbance data of protection equipment
Transmission of sequence of events
Transmission of sequence of recorded analogue values
File transfer in control direction
Transparent file