ProSoft Technology 5201-DFNT-104C - Manual (Page 26)

Configuring the Gateway 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 26 of 139 ProSoft Technology, Inc.
August 4, 2011
2.1.5 [IEC-60870-5-104 Client x Sector y]
This section allows the user to associate the monitored data points to module
database. These points are sent from the remote server to the module. There
are 3 parameters for each point association that you create: Data Type, Point
Index, Database Address.
The data type must be selected among one of the following supported types. The
Point Index is the Information Object Address which identifies the point in the
network. The Database Address defines the gateway database location on
where the point value will be stored. The database address could be defined as
bit-addressing, byte addressing, word addressing or double-word addressing
depending on the data type.
For additional information on how to set these parameters, see the Reference
chapter of this manual. The following ASDU data types are supported: