ProSoft Technology 5205-104S-PDPS - Manual (Page 96)

4205/5205-TS-104S-PDPS ♦ ProLinx Standalone Reference
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
Page 96 of 128 ProSoft Technology, Inc.
July 12, 2007
SNTP Client Status
4030 Time is valid
4031 Request count
4032 Response count
4033 Computation count
4034 Clock set count
4035 Timeout error count
The module's data mapping feature can be utilized to move this data into the
module's database area. This way the data can be made available to all drivers
on the module for use on any of the connected networks. If it is not mapped into
the module's database, the data will only be available through the
Configuration/Debug Port.
The Time is valid status register will be set to 1 if the SNTP time is valid. If the
time is not valid, the register will be set to 0. All the other registers are counters
used to determine the functionality of the driver. This version of the driver
supports SNTP Revision 3 and stratum between 1 and 14.
4.2 GSD File: prlx05a5.gsd
;============================================================
; Profibus Device Database of:
; ProLinx Communication Gateways, Inc.
; Model: ProLinx Profibus Slave
; Description: Profibus DP Slave
; Language: English
; Date: 01.16.2006
; Author: ProLinx Communication Gateways, Inc.
; Rev Date Description
; A 01/16/06 Max_Output_Len and Max_Input_Len increased to 244
;============================================================
#Profibus_DP
GSD_Revision = 2
;These are text strings associated with each parameter
;This application only uses one parameter byte required
;by the SPC3 ASIC.
ExtUserPrmData=0 "SPC3 User Prm Byte" ;
Unsigned8 0 0-7
EndExtUserPrmData
; Device identification
Vendor_Name="ProLinx Comm Gateways Inc."
Model_Name = "ProLinx Profibus Slave"
Revision = "Version 1.00"
Ident_Number = 0x05A5
Protocol_Ident = 0 ; DP protocol
Station_Type = 0 ; Slave device
FMS_supp = 0 ; FMS not supported
Hardware_Release = "Rev. 1.00"
Software_Release = "Rev. 1.00"
; Supported baudrates