ProSoft Technology 5205-104S-PDPS - Manual (Page 114)

4205/5205-TS-104S-PDPS ♦ ProLinx Standalone Reference
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
Page 114 of 128 ProSoft Technology, Inc.
July 12, 2007
Transmission of Integrated totals
(Station- or object-specific parameter, mark 'X' if function is only used in the
standard direction, 'R' if only used in the reverse direction, and 'B' if used in both
directions)
⌧ Mode A: Local freeze with spontaneous transmission
Mode B: Local freeze with counter interrogation
Mode C: Freeze and transmit by counter-interrogation commands
⌧ Mode D: Freeze by counter-interrogation command, frozen values
reported spontaneously
⌧ Counter read
⌧ Counter freeze without reset
Counter freeze with reset
Counter reset
⌧ General request counter
⌧ Request counter group 1
⌧ Request counter group 2
⌧ Request counter group 3
⌧ Request counter group 4
Parameter loading
(Object-specific parameter, mark 'X' if function is only used in the standard
direction, 'R' if only used in the reverse direction, and 'B' if used in both
directions)
⌧ Threshold value
Smoothing factor
⌧ Low limit for transmission of measured value
⌧ High limit for transmission of measured value
Parameter activation
(Object-specific parameter, mark 'X' if function is only used in the standard
direction, 'R' if only used in the reverse direction, and 'B' if used in both
directions)
Act/deact of persistent cyclic or periodic transmission of the addressed
object
Test procedure
(Station-specific parameter, mark 'X' if function is only used in the standard
direction, 'R' if only used in the reverse direction, and 'B' if used in both
directions)
Test procedure