ProSoft Technology 5205-104S-PDPS - Manual (Page 26)

4205/5205-TS-104S-PDPS ♦ ProLinx Standalone Customizing the Sample Configuration File
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
Page 26 of 128 ProSoft Technology, Inc.
July 12, 2007
1.1.11 [M_ST_NA_1 104] Section
This section defines the monitored step database for the server device emulated.
This information is sourced from the database and is transferred to the remote
client unit. Each point in the database occupies one byte.
This section takes the following parameters:
Point #:
DB Address:
Group(s):
IV DB Bit
Each point is one byte and the DB Address value corresponds to the byte offset
in the database.
1.1.12 [M_ME_NA_1 104] Section
This section defines the monitored measured value, normalized database for the
server device emulated. This information is sourced from the database and is
transferred to the remote client unit. Each point occupies a word position in the
database. The IOA for the parameters are for each object and are determined by
adding the Point # below to the value of the M_ME_NA parameter offset
parameter set in the previous section.
This section takes the following parameters:
Point #:
DB Address:
Group(s):
Default
Deadband:
IV DB Bit
Each point is one word and the DB Address value corresponds to the word offset
in the database.
1.1.13 [M_ME_NB_1 104] Section
This section defines the monitored measured value, scaled database for the
server device emulated. This information is sourced from the database and is
transferred to the remote client unit. Each point occupies a word position in the
database. The IOA for the parameters for each object are determined by adding
the Point # below to the value of the M_ME_NB parameter offset parameter set
in the previous section.
This section takes the following parameters:
Point #:
DB Address:
Group(s):
Default
Deadband:
IV DB Bit
Each point is one word and the DB Address value corresponds to the word offset
in the database.