ProSoft Technology 5205-104S-PDPS - Manual (Page 76)

4205/5205-TS-104S-PDPS ♦ ProLinx Standalone Diagnostics and Troubleshooting
IEC-60870-5-104 to PDPS Communication Module with Time Stamp
Page 76 of 128 ProSoft Technology, Inc.
July 12, 2007
Viewing Block Transfer Statistics
Press [B] from the Main Menu to view the Block Transfer Statistics screen.
Use this command to display the configuration and statistics of the backplane
data transfer operations between the module and the processor. The information
on this screen can help determine if there are communication problems between
the processor and the module.
Tip: To determine the number of blocks transferred each second, mark the
numbers displayed at a specific time. Then some seconds later activate the
command again. Subtract the previous numbers from the current numbers and
divide by the quantity of seconds passed between the two readings.
Viewing Module Configuration
Press [C] to view the Module Configuration screen.
Use this command to display the current configuration and statistics for the
module.
Opening the Database Menu
Press [D] to open the Database View menu. Use this menu command to view the
current contents of the module's database.
Opening the IEC-870-5-104 Server Menu
Press [I] to open the IEC-870-5-104 Server Menu. Use this command to view all
data associated with the IEC 60870-5-104 server driver.
Viewing SNTP Status
Press [N] to view configuration information about the SNTP client.
Refer to SNTP Support for more information on configuring and using this
function.