PLANET MAP-3020 - Manual (Page 91)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 91 of 126
o Send only MPR Selectors
o Send only MPR Selectors and MPRs
o Send all neighbours
13) MPR
• This field specifies how many MPRs a node should try select to reach every
2hop neighbour
• Data type: Integer, default value is 1
14) Shared Key
• The secret shared key.
• User must re-enter the same password at the Confirm field to set this field
• Data type: Display String
Note
Unless you are familiar with the setting, otherwise we would suggest to
keep the value unchanged, or press Reset to set back to default. These
settings should fit for the most application.
5.3.1.12 Services > NTP
The NTP service implements the Network Time Protocol to the Mesh APs to synchronize the
system time to some time reference. The NTP Table in this page lists the NTP server that is
used by the device.