PLANET MAP-3020 - Manual (Page 42)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 42 of 126
As mentioned previously, the NMS use the SNMP method to read the data. Hence if the data
is failed to load, you may check the SNMP Community or Passwords. The two small circles
on the top of the table indicate the status of the table. If the green circle is light up, it shows
the table is loaded completely; if the orange circle is light up, it means the table is loading the
data, else if the circle to turn to red color, it indicates that the data loading is failed.
On the other hand, the bar chart at the bottom of the table displaying the signal strength (in
RSSI) between the selected AP and all its neighbour nodes. The scale of the chart can be
enlarged by dragging the desired range of x-axis. Drag backward to reset the chart.
4.2.3.21 Client Properties
The client properties panel is located at the other side of the map container. In order to initiate
the NMS to download the client details, hit on the Start button at the bottom of the panel. In
case if there is more than one map is running, a menu would popup to prompt user to select
which map to be targeted. Once selected, the scanning will be started instantly.