PLANET MAP-3020 - Manual (Page 123)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 123 of 126
4) Comment
• An optional comment regarding the table entry
• Data type: Display String
5) Active
• Define the status of the table entry, either active or inactive
5.3.2.20 Status > DHCP Client
At the status tab, the DHCP Client list displays the DHCP Client information such as Mac
Address, IP Address and their hostname. This table is a read-only table, hence administrator
is unable to edit the table using the AP Configurator.
5.3.2.21 Command > Reboot
The reboot feature in the AP Configurator enables the NMS admin to restart the Mesh AP, thru
the SNMP protocol, even if they are located remotely from the user. Once executed, all the
service provided by the AP will be halted, until the reboot process completed successfully.