PLANET MAP-3020 - Manual (Page 124)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 124 of 126
In order to reboot the Mesh AP, click on the Reboot now button in the Command > Reboot
page, and confirm the process at the window popup.
Note that the changes that perform on the AP thru the AP Configurator required a reboot to
commit to the device.
5.3.2.22 Command > Reset
The reset feature, meanwhile, provide the user of the NMS to restore the factory default
parameters back to the device. This feature is extremely effective especially on the occasion
where the Mesh AP is having some error due to inappropriate configuration. However please
note that once the reset is performed, all the settings or changes done previously on the AP
will be removed permanently.
In order to reset the Mesh AP, click on the Reset to Factory Settings button in the
Command > Reset panel, and confirm the action at the popup window. Hit the Back button if
you wish to cancel the command.
5.3.2.23 Command > Download/Upload