PLANET MAP-3020 - Manual (Page 83)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 83 of 126
3) Band
• The band to use
• Three options available: 802.11a, 802.11b, and 802.11g
4) Frequency
• The operating frequency of the ath1 wireless network interface in Mega Hertz
5) TX Antenna
• The properties of the transmission antenna
• Available selection: Diversity, Port1, Port2 and Card Default
6) RX Antenna
• The properties of the reception antenna
• Available selection: Diversity, Port1, Port2 and Card Default
7) Current Tx Power (dBm)
• This read-only field indicating the current transmission power level used by the
wireless interface.
• The value is in the unit of dBm
8) Tx Power (dBm)
• The transmission power level of the wireless interface
• The default value is Max, where the device will tune the transmission power to
the maximum level of the wireless interface.
Click the Save Changes button to commit the common configurations.
Parameters (Virtual AP list)
1) ESSID
• The Enhanced Service Set Identifier of the wireless network
• Data type: Display String
2) Broadcast SSID
• Enable or disable the SSID to be broadcasted.
3) Beacon Interval
• The beacon interval in milliseconds