PLANET MAP-3020 - Manual (Page 30)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 30 of 126
The default value for Scan-IP:
Community: public
Username: snmpv3rouser
Password: snmpv3password
Passphrase: snmpv3passphrase
4.2.3.10 Socket Port
The notification of an AP node is sent according to its NMS Address Table . The table defines
the IP Address and port number of the destination (NMS). For instance, if the admin has
added a table entry with port number 8000 at the AP, the NMS user can change the socket
port number to 8000 in order to receive the notification.
In order to update the socket port, select Settings > Socket Port from the menu bar. A dialog
box would appear on the screen to prompt for the port number, which range from 1 to 65535.
Hit OK to confirm the change.
4.2.3.11 SNMP Community / Passwords (for AP Unit)
In case if a Mesh AP utilizes a different community or passwords from the others, the NMS
might fail to read the topology from it. Hence, user might need to edit the individual AP unit
SNMP keys, by right-click the desired active node. Select Change v2c Community from the
popup menu to change the community; or click Change v3 Passwords to change the v3
keys; enter the correct value in the dialog box and click Change and Use SNMP Version X.