PLANET MAP-3020 - Manual (Page 4)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 4 of 126
4.2.3.21 Client Properties 42
4.2.3.22 Get/Set using MIB Reader 43
4.2.3.23 Load/Unload MIB 46
4.2.3.24 Alarm Table 47
4.2.3.25 Add Trap Agent 48
4.2.3.26 View Log Files 50
4.2.3.27 Show Route 51
4.2.3.28 Create VPN Connection 53
4.2.3.29 Configure Mesh APs 58
4.2.3.30 Discovery Tool 60
4.2.3.31 View Interface and Client Live Statistic 60
4.2.3.32 Logout Client 62
5 Configure the Mesh AP using AP Configurator 64
5.1 Overview of AP Configurator 64
5.2 How to use AP Configurator 65
5.3 Configure the Mesh AP 67
5.3.1 System > system 67
5.3.1.1 System > Syslog 69
5.3.1.2 System > Advanced Tuning 69
5.3.1.3 Network > Network 72
5.3.1.4 Network > WAN (MAP-3100 only) 73
5.3.1.5 Network > VLAN 77
5.3.1.6 Network > Mesh 79
5.3.1.7 Network > Wireless Configuration 82
5.3.1.8 Network > Route 85
5.3.1.9 Network > IP Sec (MAP-3100 only) 86
5.3.1.10 Network > L2TP Client 88
5.3.1.11 Network > OLSR (MAP-3100 only) 89
5.3.1.12 Services > NTP 91
5.3.2 Services > DHCP (MAP-3100 only) 93
5.3.2.1 Services > MAC Access 95
5.3.2.2 Services > NAT (MAP-3100 only) 97
5.3.2.3 Services > Firewall (MAP-3100 only) 98
5.3.2.4 Services > Traffic Shaping (MAP-3100 only) 100
5.3.2.5 Services > PPTP Server (MAP-3100 only) 102
5.3.2.6 Services > Mobile IP (Future Feature) (MAP-
3100 only)
104
5.3.2.7 Services > Captive Portal 105
5.3.2.8 Services > Radius 107
5.3.2.9 Services > Dynamic DNS 109
5.3.2.10 Services > Zero Config (MAP-3100 only) 110
5.3.2.11 Services > Auto IP (MAP-3100 only) 110
5.3.2.12 Services -> Route Watch Dog (MAP-3100 only)
111
5.3.2.13 Services -> System Watch Dog (MAP-3100
only) 112
5.3.2.14 Services -> SSHD 112
5.3.2.15 Services > WME 113
5.3.2.16 Management > HTTPD 115