PLANET MAP-3020 - Manual (Page 58)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 58 of 126
The configuration of the VPN is done.
4.2.3.29 Configure Mesh APs
Two methods are available to configure the Mesh AP unit remotely via the NMS,: thru Web-
based Configuration Page or launch the AP Configurator. In order to invoke any of these two
methods, right click on any of the active Mesh AP unit on the topology map (gateway or relay).
A popup menu would appear, as shown:
Select the AP Configurator or Web-Based Config option. The following figure shows the
screenshot of the Web-based Configuration page.
Enable the option