PLANET MAP-3020 - Manual (Page 47)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 47 of 126
4.2.3.24 Alarm Table
The Alarm Table of the PLANET Mesh Network Management Tools enable user to check on
the traps and notifications caught by the trap receiver. The entries are read-only, and shall be
deleted once they were resolved or reviewed.
In order to start listen to the traps, hit the Start button at the toolbar or select Settings > Start
Trap from the menu bar. Select the Stop button, or Settings > Stop Trap to stop the trap
listener. User can change the SNMP Trap community or passwords at the available columns
and hit the Set button. The checkboxes at the bottom of the settings section are the table
filtering options. Clear the selection of the checkbox to hide the relative entry in the trap table.
Each level of severity is represented by a different color.
Select any entry from the alarm table, its description will be displayed at the Trap Description
area at the bottom of the table. If you wish to remove the selected entry, click on the Delete
button.